Commands; Iec61850 Generic Communication I/O Functions Dpggio; Synchronism Check And Energizing Check Sesrsyn (25) - ABB REL670 Operator's Manual

Section 11
Test the IED
11.6.10.3
11.6.10.4
11.6.10.5
88

Commands

In the commands menu it is possible to view three sets of values. These are found
under the submenus menucascade/uicontrol.
Automation bits, command function for DNP3.0 AutomationBits
Main menu/Test/Function status/Control/Commands/Automation Bits/ABI
Displays the output data of the AutomationBits function.
IEC60870-5-103
Main menu/Test/Function Status/Control/Commands/IEC60870-5-103
Under this part of the HMI tree there are the following three submenus:
• IED Commands
• Function Commands
• User Defined Commands
Various IED, function and user defined command data can be viewed here.
Single command SINGLECMD
Main menu/Test/Function status/Control/Commands/SingleCommand/CD
There are OUT signals under the Single command menu.
Selector mini switch VSGGIO
Main menu/Test/Function status/Control/Commands/VersatileSwitch/VS
Displays the output data of the VSGGIO function.

IEC61850 generic communication I/O functions DPGGIO

Main menu/Test/Function status/Control/DoubelPointIndication(DPGGIO)/DP
Displays the output data of the DPGGIO function.

Synchronism check and energizing check SESRSYN (25)

Main menu/Test/Function status/Control/Synchronizing(RSYN,25)/SYN
1MRK506276-UUS B
Operator's manual