Control; Apparatus Control - ABB REL670 Operator's Manual

Section 9
Read and change settings
9.2.5
9.2.5.1
48

Control

Apparatus control

Overview
Under Control in General settings, parameters for Apparatus control can be adjusted.
These are the parameters for among others Bay control, Switch controller, Reservation
input, Circuit breakers and Circuit switches. The parameters include delay times,
dependencies, pulse times and characteristics.
Bay control QCBAY
Main menu/Settings/General settings/Control/ApparatusControl/
BayControl(CBAY)
Displays up to six instances of the bay control function QCBAY with a setting that
gives the local operator priority over the remote operator or vice versa.
Bay reserve QCRSV
Main menu/Settings/General settings/Control/ApparatusControl/
BayReserve(CRSV)/CR
Displays up to four instances of the bay reserve function QCRSV with nine parameter
settings. The first is for setting the supervision time to cancel a reservation and the
other eight are for the reservation of the own bay only at the selection of an apparatus.
Circuit breaker SXCBR
Main menu/Settings/General settings/Control/ApparatusControl/
CircuitBreaker(XCBR)/XC
Displays available instances of the circuit breaker function with parameter settings
SXCBR for various time limits and pulse lengths. For example, different circuit
breakers may require different pulse lengths to react. The setting tOpenPulse is used to
set the length of the pulse required to open a breaker.
Circuit switch SXSWI
Main menu/Settings/General settings/Control/ApparatusControl/
CircuitSwitch(XSWI)/XS
Displays available instances of the circuit switch function SXSWI with a number of
settable parameters per instance for time and pulse settings, output reset and switch type.
Local/Remote switch LocalRemote, LocRemControl
Main menu/Settings/General settings/Control/ApparatusControl/LocalRemote/LR
1MRK506276-UUS B
Operator's manual