Monitoring; Overview; Service Values Cvmmxu; Disturbance Report Drprdre - ABB REL670 Operator's Manual

Section 9
Read and change settings
9.2.6
9.2.6.1
9.2.6.2
9.2.6.3
9.2.6.4
50

Monitoring

Overview

Under monitoring there are parameters for setting Service values, current phasors,
Voltage phasors, Disturbance reports, Fault locator and the Measured value expander
block.

Service values CVMMXU

Main menu/Settings/General Settings/Monitoring/ServiceValues(MMXN)/SVR
Displays available instances of CVMMXU.

Disturbance report DRPRDRE

Main menu/Settings/General Settings/Monitoring/Disturbance Report/
DisturbanceReport(RDRE)
Displays available settings.
Binary signals
Main menu/Settings/General settings/Monitoring/Disturbance report/Binary
signals(RBDR)/Channel xx-yy
There are some groups of several channels with several binary outputs per channel.
Each channel has some settable parameters. These are operation, trig level, indication
MA and set LED.
Analog signals
Main menu/Settings/General settings/Monitoring/Disturbance report/Analog
signals(RADR)/Channel xx-yy
There are some groups of a number of channels with a number of analog signals per
channel. Each signal has some settable parameters such as operation, Nominal value
and trig values.

Fault locator LMBRFLO

Main menu/Settings/General Settings/Monitoring/FaultLocator(RFLO)/FLO
Displays available instance of fault locator LMBRFLO with some parameters.
1MRK506276-UUS B
Operator's manual