Section 9
Read and change settings
9.1.2.2
9.1.2.3
9.1.2.4
9.1.2.5
9.1.2.6
9.1.2.7
9.1.2.8
40
TimeSynch
Main menu/Settings/Time/Synchronization/TimeSynch
Here the parameters FineSyncSource, CourseSyncSrc and SyncMaster are switched on
or off.
TimeSynchBIN
Main menu/Settings/Time/Synchronization/TimeSynchBIN
Binary input synchronization settings available here are the position of the of the
module, the number of the binary input and the detection mode.
TimeSynchDSTBegin
Main menu/Settings/Time/Synchronization/TimeSynchDSTBegin
The starting point for Daylight Savings Time is set here.
TimeSynchDSTEnd
Main menu/Setttings/Time/Synchronization/TimeSynchDSTEnd
The end point of Daylight Savings Time is set here.
TimeSynchIRIG-B
Main menu/Settings/Time/Synchronization
The type of input, time domain, type of encoding and time zone for IRIG-B are set here.
TimeSynchSNTP
Main menu/Settings/Time/Synchronization/TimeSynchSNTP
Here the IP addresses for the Simple Network Time Protocol servers are set.
TimeZone
Main menu/Settings/Time/Synchronization/TimeSynch
The time zone according to Coordinated Universal Time (UTC) is set here.
1MRK506276-UUS B
Operator's manual