Intended Audience; Related Documents - ABB REL670 Operator's Manual

Line distance protection
Hide thumbs Also See for REL670:
Table of Contents

Advertisement

1MRK506276-UUS B
1.1.3
1.1.4
Documents related to REL670
Operator's manual
Installation and commissioning manual
Technical reference manual
Application manual
Buyer's guide
Sample specification
Connection diagram, Single breaker arr. Three-pole tripping arr.
Connection diagram, Single breaker arr. Single-pole tripping arr.
Connection diagram, Multi breaker arr. Three-pole tripping arr.
Connection diagram, Multi breaker arr. Single-pole tripping arr.
Configuration diagram A, Single breaker with single or double busbar, 3 pole tripping (A31)
Configuration diagram B, Single breaker with single or double busbar, 1/3 pole tripping (A32)
Configuration diagram C, Multi breaker such as breaker-and-a-half or ring busbar arr. 3 pole tripping (B31)
Configuration diagram D, Multi breaker such as breaker-and-a-half or ring busbar arr. 1/3 pole tripping (B32)
Setting example 1, 400 kV Long overhead power line with breaker-and-a-half CB arr. Quadrilaterial characteristic.
Table continues on next page
Operator's manual
The chapter "Diagnose IED status" describes the location and use of available
diagnostic tools.
The chapter "Test the IED" describes the tests applicable to the IED.
The chapter "Control and supervise the bay" describes how to use the Single Line
Diagram to open and close primary apparatuses.
The chapter "Reset" describes resetting procedures.
The chapter "Authorization"describes user categories and password procedures.
The chapter "Glossary" describes words and acronyms used in the literature
describing the IED.
This manual does not contain any instructions for commissioning or testing.

Intended audience

General
The operator's manual addresses the operator, who operates the IED on a daily basis.
Requirement
The operator must be trained in and have a basic knowledge of how to operate
protection equipment. The manual contains terms and expressions commonly used to
describe this kind of equipment.

Related documents

Section 1
Introduction
Identity number
1MRK 506 276-UUS
1MRK 506 277-UUS
1MRK 506 275-UUS
1MRK 506 278-UUS
1MRK 506 280-BUS
SA2005-001282
1MRK 002 801-BA
1MRK 002 801-CA
1MRK 002 801-DA
1MRK 002 801-EA
1MRK 004 500-86
1MRK 004 500-87
1MRK 004 500-88
1MRK 004 500-89
1MRK 506 267-WEN
13

Advertisement

Table of Contents
loading

Table of Contents