Advertisement
05 | Keysight | E5063A ENA Series Network Analyzer - Configuration Guide
Test Accessories and Calibration Kits
Test accessories and calibration kits that can be used with the E5063A are listed in this section. A complete line of test accessories
and calibration kits can be found at the following websites:
http://www.keysight.com/find/na_accessories
http://www.keysight.com/find/accessories
Test accessories
Test accessories such as test port cable are necessary for a complete measurement system using the E5063A. Order test accessories
in accordance with the desired measurement system.
Category
Cables
Adapters
Calibration kits
Calibration is an accuracy enhancement procedure that effectively reduces the system errors that cause uncertainty in network
measurement. Calibration kit is necessary to perform the calibration.
– Mechanical calibration kits include standards, such as opens, shorts and loads, which are measured by the network analyzer.
Choose a calibration kit for each connector type to be used.
– Electronic calibration (ECal) modules replace mechanical calibration standards with one solid-state calibration module that is
controlled by the network analyzer via USB. ECal modules provide many different impedances to the test ports which enables a
full two-port calibration to be performed quickly with a single connection. This technique reduces operator errors and connector
wear and abrasion.
Category
Mechanical calibration kits
Electronic calibration kits
Literature Resource
Description
E5063A Network Analyzer Data Sheet
E5063A Network Analyzer Brochure
E5063A PCB Analyzer Technical Overview
Network Analyzers Selection Guide
More literature is available on our web site.
Web Resource
Get the latest news, product and support information, application literature and more.
http://www.keysight.com/find/e5063a
Product Number
Description
N6314A
50 Ω type-N (m) to type-N (m) cable, DC to 12.4 GHz, 61 cm (24 in)
N6315A
50 Ω type-N (m) to type-N (f) cable, DC to 12.4 GHz, 61 cm (24 in)
11500E
3.5 mm (m) to 3.5 mm (m) cable, 61 cm (24 in)
11500F
3.5 mm (m) to 3.5 mm (m) cable, 152 cm (60 in)
11853A
50 Ω Type-N accessory kit
11878A
Type-N to 3.5 mm adapter kit
Product Number
Description
85032F
Standard Mechanical Calibration Kit, DC to 9 GHz, Type-N, 50 Ω
85054D
Economy Mechanical Calibration Kit, DC to 18 GHz, Type-N, 50 Ω
85092C
RF ECal: 300 kHz to 9 GHz, 2 ports, Type-N, 50 Ω
N4431B
Microwave ECal: 9 kHz to 13.5 GHz, 4 ports
N4432A
Microwave ECal: 300 kHz to 18 GHz, 4 ports
N4690C
Microwave ECal: 300 kHz to 18 GHz, 2 ports, Type-N, 50 Ω
Publication number
5991-3615EN
5991-3614EN
5991-3617EN
5989-7603EN
Advertisement
