Install And Configure - NETGEAR PS 104 Quick Installation Manual

5
Install and Configure
If you are using Windows 95, Windows 98, or Windows NT, this section provides you with
information on how to:
• Install FirstGear on the network administrator's PC
• Configure your print server from the network administrator's PC
• Set up each Windows PC so that it can recognize the print server
Before proceeding with these instructions, make sure you have assigned a name to your
workgroup.
Install the FirstGear Administration Program
FirstGear, a software program used with NETGEAR products for quick and easy installation, is
provided on one disk included in your package contents.
To install FirstGear on your PC:
1. Insert the FirstGear Installation Disk in Drive A.
2. Double-click on Drive A.
3. Double-click on "Setup" to start the installation process and open the "Welcome"
window.
There is more than one Setup file on the disk. Make sure you select the application file (if
viewing with icons, it looks like a PC).
4. Click on "Next" to open the "Choose Destination Location" window.
5. Click on "Next" to install the FirstGear Administration Program in the Program Files
folder.
6. Click on "Next" to title the program folder "FirstGear"
(the default name).
Verify that the information on the screen is correct.
7. Click on "Next" when the "Start Copying Files" window opens.
8. Click on "Yes" when the "Setup Complete" window opens if you want to read the
ReadMe file, and then click on "Finish."
The FirstGear Administration Program is installed on your network administrator's PC.
Configure Your Print Server
Before configuring your print server, make sure that the network card in the administrator's PC is
connected to the powered-on print server. Also make sure that the network card is configured to
use the NetBEUI protocol.
To configure your print server, access the FirstGear Administration Program by following the
steps outlined in this section.
1.
Click on "Start" on the desktop, select "Programs," select "FirstGear," and then select
"Print Server Administration" to execute the FirstGear Print Server Administration
Program and to open the "Print Server Administration Program" window.
Model PS104 and Model PS110 Print Server Quick Installation Guide