Calibration Counter For Approved Scales - Adam GBK 16a Manual

Next to the LCD are a number of LED's that show when the weight is below, within
or over the limits during check weighing.
Weight
below the low limit
Within the limits
Above the high limit
NOTE: The LED's can be set by the user to off, bar, spot or segment mode. See "F3
LED" in section 13.1
The LED can be set to display as a bar, increasing from Low to OK to High, a single
spot increasing from Low, OK to High, or as a single bar that changes colour as the
weight progresses from Low to OK to High.
6.

CALIBRATION COUNTER FOR APPROVED SCALES

The approved (GBK/GFK-M Model) scales have the ability to control access to the
calibration or metrology parameters using a passcode to limit access.
requirements for doing this stipulate the code should be apparent and recorded in a
suitable location on the scale.
In this way if the record of the Calibration or Parameter counters do not agree with
recorded settings the responsible person inspecting the scale can take appropriate
action.
LED
Amber
Green
Red
14
| © Adam Equipment Company 2010
P a g e
LCD
LO
OK
HI
The