3.
INSTALLATION
3.1.
UNPACKING
The GBK/GFK scales have already been adjusted to work with a platform and have
been configured for this application.
calibrated as a pair and must be used together .
3.2.
LOCATING
The platform and indicator have been
The scales should not be placed in a location that will
•
reduce the accuracy.
Avoid extremes of temperature. Do not place in direct
•
sunlight or near air conditioning vents.
Avoid unsuitable tables. The table or floor must be rigid
•
and not vibrate.
Avoid unstable power sources. Do not use near large
•
users of electricity such as welding equipment or large
motors.
Do not place near vibrating machinery.
•
Avoid high humidity that might cause condensation.
•
Avoid direct contact with water. Do not spray or
immerse the scales in water.
Avoid air movement such as from fans or opening doors.
•
Do not place near open windows or air-conditioning
vents.
Keep the scales clean. Do not stack material on the
•
scales when they are not in use.
9
|
P a g e
© Adam Equipment Company 2010