Print Mode
Permissible insertions when printing the message text
You can enter spaceholders in the message text when configuring message texts on the memory
submodule. These spaceholders are replaced accordingly on printout.
You can enter spaceholders for the following:
•
Date and time of day
•
Further message texts
•
Variables
•
Control characters for the printer (double-width type, bold type...)
Figure 6-8. is a schematic representation of "Print message text". Prerequisite is that a configured
memory submodule is plugged into the CP.
*
5.2
The CP 523 can report further errors to the CPU ( 6.6).
For example:
•
Default clock time set
•
Printer not ready
•
No battery backup
6-42
Transfer variables 1 to 3 in words 2, 4 and 6 to
the CP, where applicable
Transfer the job number and message text
number to the CP in word 0
Read the CP status in byte 0
YES
Job/message buffer full?
CP services request
Figure 6-8. Schematic for "Print Message Text"
Start
*
NO
End
CP 523
EWA 4NEB 811 6044-02a