Siemens SIMATIC S5 CP 523 Manual page 65

Print Mode
Configuring headers and footers
You can configure up to two headers and two footers.
The headers and footers may contain spaceholders for the date and time of day as well as for
control characters. Spaceholders for variables and message texts are not evaluated, and appear in
the printout as configured.
Headers and footers are configured according to the following schematic:
Block
separator
":" (3A )
H
Figure 6-2. Schematic for Entering Headers and Footers
Enter the header or footer in the same manner as the ASCII characters of a message text ( 6.4).
Note:
A header or footer must not be configured with more than 136 characters. The printed text may
be longer than one line if spaceholders are used.
Continuous printout
It is recommended that the message text printout be configured as followes if you want to output
your message texts to screen:
• without page number
• without header
• without footer
You will get so a continous printout of all message texts.
6-10
If entering more than one header or footer
Parameter Header or
block
number number
"6" (36 ) (K1, K2, F1, F2)
H
(parameter block 5)
(parameter block 6)
(parameter block 6)
footer
Text
CP 523
End-of-
text
character
"$"
EWA 4NEB 811 6044-02a