Siemens SIMATIC S5 CP 523 Manual page 64

CP 523
Page format
The page format is defined by the information given in parameter blocks 5 and 6.
Line
1 Blank line
. Blank line
.
. Blank line
. Header 1
. Header2
. Blank line
. Blank line
.
.
.
.
.
.
.
.
.
. Blank line
. Blank line
. Footer 1
. Footer 2
. Blank line
.
. Blank line
n Blank line
Left margin (configurable up to 60 characters)
Number of lines per page: 20 to 255
(configurable within the range 14
Note:
The CP 523 counts the lines on a page using the line feeds (LF) sent to the printer.
If you print 15 message texts with CR/LF, for example, the CP counts 15 lines. The CP does not
count the additional lines for message texts longer than one line.
EWA 4NEB 811 6044-02a
Table 6-5. Page Format
Page Format
(if page number, header or footer has been configured)
(if page number, header or footer has been configured)
Page No. at top
(if page number configured at top)
(if header(s) configured)
(if header(s) have been configured)
Lines for message texts
A maximum of 4095 message texts can be configured.
A message text may not exceed 136 characters
Configuration is described in 6.4.
(if footer(s) configured)
(if footer(s) configured)
(if the page number is configured at bottom)
Page number at bottom
(if page number, header or footer has been configured)
(if page number, header or footer has been configured)
to FF )
H H
Print Mode
6-9