Siemens SIMATIC S5 CP 523 Manual page 7

CP 523
Courses
Siemens provide SIMATIC S5 users with extensive opportunities for training.
For more information, please contact your Siemens representatives.
Reference Literature
This manual is a comprehensive description of the CP 523 serial I/O module. Topics not specific to
the CP 523, however, are only briefly dealt with. You will find more detailed information in the
following literature:
• Programmable Controllers
Volume 1: Logic and Sequencing Control; From the Task to the Program.
Günter Wellenreuther, Dieter Zastrov
Braunschweig 1987
Contents:
- Method of operation of a programmable controller
- Theory of control technology using the STEP 5 programming language for the SIMATIC S5
programmable controllers.
Order No.: ISBN 3-528-04464-0
• Automating with the S5-115U
SIMATIC S5 Programmable Controllers
Hans Berger
2nd Edition, Berlin and Munich: Siemens AG, 1989
Contents:
- STEP 5 programming language
- Program scanning
- Integral program blocks
- I/O interfaces
Order No.: ISBN 3-8009-1526-X
EWA 4NEB 811 6044-02a
Introduction
ix