Installation Adjustments
When the password mode is active, your password will be asked (menu 1).
Your password contains 4 digits.
Adjusting the projector with the RCU.
Enter the digits with the numeric keys on the RCU.
Example : 2 3 1 9
For each digit entered, a 'X' appears on the screen under the displayed text 'enter password'.
When your password is correct, you get access to the 'Installation mode'.
When the entered password is wrong, The message 'Wrong password !!!' will be displayed (menu 2). The projector stays on the
previous selected item.
Factory programmed
password :
0000
enter
password
xxxx
menu 1
Adjusting the projector with the local keypad.
When the 'compose password' menu is displayed (menu 1), select with the cursor keys the first digit of your password and press
ENTER. Continue by selecting the second digit with the cursor keys and press ENTER. Handle in the same way for the third and
fourth digit.
When your password is correct, you get access to the 'Installation mode'.
When the entered password is wrong, the message 'Wrong password' will be displayed.
COMPOSE
PASSWORD
????
7
8
9
4
5
6
1
2
3
0
Select é, ê
è or ç
then <ENTER>
<EXIT> to return.
menu 1
Overview flow chart installation mode.
ADJUSTMENT MODE
INSTALLATION
6-2
wrong
password
!!!
menu 2
SCHEIMPFLUG ADJUSTMENT
OPTICAL LENS FOCUSING
RASTER CENTERING
CRT PROJECTION ANGLE ADJUSTMENT
5976067 BARCOCINE 7 151299