Installation Adjustment Mode; Access To Installation Adjustment Mode; Overview Flowchart Of The Installation Adjustment Mode - Barco Data 1209s Installation Manual

8

INSTALLATION ADJUSTMENT MODE

Access to Installation Adjustment Mode

It will be necessary to perform several mechanical adjustments while
in the Installation Adjustment Mode. It will be required to open and
remove the projector's top cover in order to gain access to the
adjustment points.
To enter into the installation adjustment mode :
1 Press ADJUST to start up the adjustment mode.
2 Push the control disc up or down to highlight the path
INSTALLATION in the "Adjustment mode" menu and then press
ENTER.
3 A warning will be displayed on the screen. If you are a qualified
and authorized service person, press ENTER to start up the
installation mode. Otherwise, press EXIT to return.
When entering the installation mode, the projector will automatically
switch to the internal pattern on 15 kHz/50 Hz.
4 When the password mode is active, you will be requested to enter
the 4 digit password.
Enter the digits with the numeric keys on the RCU or the local
keypad.
Example : Password as 2 3 1 9
For each digit entered, a 'X' appears on the screen under the
displayed text 'enter password'.
If the entered password is correct, you get access to the
'Installation Adjustment Mode'.
If the entered password is wrong, The message "Wrong pass-
word!!!" will be displayed. The projector stays on the previous
selected item.
Factory programmed password :
0 0 0 0

Overview flowchart of the Installation Adjustment Mode

Adjustment Mode
Installation
5975718 BARCODATA 1209s 050698
All manuals and user guides at all-guides.com
Projector Distance
CRT Projection Angle Adjustment
Installation adjustment mode
ADJUSTMENT MODE
Select a path from
below:
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
IRIS
WARNING
RISK OF ELECTRICAL SHOCK
NO USER ADJUSTABLE PARTS
INSIDE
THE FOLLOWING
INSTALLATION MENUS
ARE RESERVED TO,
AND TO BE PERFORMED ONLY
BY BARCO PERSONNEL, OR
BARCO AUTHORIZED DEALERS
IF QUALIFIED, PRESS
<ENTER> TO CONTINUE, OR
IF NOT, <EXIT> TO RETURN.
Optical Lens Focusing
Scheimpflug Adjustment
enter
password
xxxx
197
enter
password
xxxx
197
Raster Centering
8-1