Barco R9002380 Installation Manual page 36

G2 Adjustment
Check the correct raster adjustment by pressing ENTER to toggle ABL to ON. Repeat these steps if necessary.
Continue wiht the other colors. Use the right or left arrow to select the next color.
Note : The best result is obtained in a completly dark room or by looking into the lenses, but be aware that brightness and contrast
are on a high level.
Loosen screws and move the cover plate
to the left to access the G2 controls.
Cover the G2 controls again after alignment.
G2 Adjustments
Red Green Blue
7-2 5976067 BARCOCINE 7 151299