Danfoss vlt aqua Design Manual page 87

®
VLT AQUA Drive Design Guide
3.6.14 Remote Mounting Kit for
The local control panel can be moved to the front of a cabinet by using
the remote built-in kit. The enclosure is the IP65. The fastening screws
must be tightened with a torque of max. 1 Nm.
Ordering no. 130B1113
Figure 3.26: LCP kit with graphical LCP, fasteners, 9.8 ft [3 m] cable and
gasket.
LCP kit without an LCP is also available. Ordering number: 130B1117
For IP55 units, the ordering number is 130B1129.
Technical data
Enclosure:
Max. cable length between and unit:
Communication std:
Ordering no. 130B1114
Figure 3.27: LCP kit with numerical LCP, fasteners and gasket.
®
MG.20.N5.22 - VLT is a registered Danfoss trademark
3 VLT AQUA Selection
IP 65 front
9.8 ft [3 m]
RS 485
3
3-43