Danfoss vlt aqua Design Manual page 71

®
VLT AQUA Drive Design Guide
60 AVM - Pulse Width Modulation, 525–690 V (except P400)
Figure 3.11: Derating of I
out
closure D at 690 V, using 60 AVM in Normal torque mode
not
(110% over torque). Note:
60 AVM - Pulse Width Modulation, 525–690 V, P400
Figure 3.13: Derating of I
out
closure D at 690 V, using 60 AVM in Normal torque mode
(110% over torque). Note: P400
E and F enclosures
60 AVM - Pulse Width Modulation, 380–480 V
Figure 3.15: Derating of I
out
closure E at 480 V, using 60 AVM in normal torque mode
(110% over torque)
for different T for en-
AMB, MAX
valid for P400.
for different T for en-
AMB, MAX
only .
for different T for en-
AMB, MAX
®
MG.20.N5.22 - VLT is a registered Danfoss trademark
SFAVM - Stator Frequency Asyncron Vector Modulation
Figure 3.12: Derating of I
out
closure D at 690 V, using SFAVM in normal torque mode
not
(110% over torque). Note:
SFAVM - Stator Frequency Asyncron Vector Modulation
Figure 3.14: Derating of I
out
closure D at 690 V, using SFAVM in normal torque mode
(110% over torque). Note: P400
SFAVM - Stator Frequency Asyncron Vector Modulation
Figure 3.16: Derating of I
out
closure E and F at 480 V, using SFAVM in Normal torque
mode (110% over torque)
3 VLT AQUA Selection
for different T for en-
AMB, MAX
valid for P400.
for different T for en-
AMB, MAX
only .
for different T for en-
AMB, MAX
3
3-27