Cleaning Procedure; Reverse Exit Section; Cleaning Section Of The Reverse Exit Section - Konica Minolta bizhub pro 1100 Maintenance Manual

Reverse exit section

CAUTION
Be sure to check the cleaning section before you activate the power of the main body.
If you activate the power with the door of the main body closed, the inside of the fusing unit becomes hot. Therefore,
you possibly get burned when you clean near the fusing unit.

)Cleaning section of the reverse exit section

- De-curler entrance roller
- Conveyance roller
- Opposed roller of the fusing exit roller
NOTICE
- Be careful not to drop any dirt on the paper path when you clean the machine.

)Cleaning procedure

1
Moisten the cleaning pad with isopropyl
alcohol, and clean the dirt on the
conveyance roller.
2
Open the lever [M7].
1-19