Konica Minolta bizhub pro 1100 Maintenance Manual page 20

3
Move the paper fur brush for the
registration roller/Lw to the initial posi-
tion.
NOTICE
When you move the paper fur brush for the registration
roller/Lw to the initial position, be sure to insert it fully
until it hits against the back.
4
Remove 3 paper fur brushes for the
registration roller/Up while you release
2 projections for each in the arrow-
marked direction.
5
Remove the paper dust which adheres to
the paper fur brush for the registration
roller/Up with a cleaning pad.
1-15