Konica Minolta bizhub pro 1100 Maintenance Manual page 39

7
Measure the resultant restart timing.
Allowance: 20 mm 0.5 mm / 0.79"
8
If any adjustment is required, press [Exit PrintMode] to return to the [Restart Timing
Adjustment] screen.
9
Use the touch panel keypad or the keypad on the control panel to enter the setting
data.
- Use [+/-] to specify the value to be positive or negative.
- Press [Set] to change the Current Value.
- Adjustment Range: [All Trays Offset]: ([Lower]) -45 to +45 ([Higher]) (1 step = 0.1 mm)
- Adjustment Range: [Trays 1] to [Tray 5], [Bypass]: ([Lower]) -30 to +30 ([Higher]) (1 step = 0.1 mm)
- For each tray, you can adjust image edge position of the paper feed direction until the sum of [All
Trays Offset] and the adjusted value of the individual tray reaches -60 to +60.
10
Repeat steps 4 to 9 until the desired result is obtained.
11
Press [Return].
The screen returns to the [Printer Adjustment Menu] screen.
20
0.02"
bizhub PRO 1100
2
2-13