Fuses - Suzuki gw250F Owner's Manual

LICENSE PLATE LIGHT
To replace the license plate light bulb,
follow the procedure steps:
1. Remove the nuts 1 and washers.
2. Pull out the socket 2 from the
lens and then remove the lens.
3. Pull off the bulb from the socket.

FUSES

If something electrical on your motor-
cycle stops working, the first thing you
should check for is blown fuse. The
electrical circuits on the motorcycle
are protected from overload by fuses
in the circuits.
If a blown fuse is found, then the elec-
trical problem must be inspected and
repaired before replacing the blown
fuse with a new fuse. Consult your
Suzuki dealer for the electrical system
check and repair.
!WARNING
Replacing a fuse with incorrect
amperage rating or substitute, e.g.
aluminum foil or wire, may cause
serious damage to the electrical
system and possibly fire. Always
replace a blown fuse with a fuse of
the same amperage rating.
If the new fuse blows in a short
time, the electrical problem may
not be fixed. Have your motorcy-
cle inspected immediately by your
Suzuki dealer.
6-46