Suzuki gw250F Owner's Manual page 24

ODOMETER/TRIP METER/CLOCK F
The display has 4 functions; odome-
ter, 2 trip meters and clock. When the
ignition switch is turned to the "ON"
position, the test pattern is displayed.
The display is memorized when the
ignition switch is turned off and the
memorized display appears when the
ignition switch is turned on again.
NOTE: (EU, Australia, Canada)
• Set the meter to odometer, then
press and hold the ADJ button B
and SEL button D for 3 seconds
to switch between km and mile. At
this time, speedometer will be
changed between km/h and mph.
• Select km/h or mph, as appropri-
ate, to comply with traffic regula-
tions.
• Check km/h and mph display after
adjusting the instrument panel dis-
play.
To change the display, push the SEL
button D. The display changes in the
order below.
Odometer
Trip meter 1
Trip meter 2
2-12
Clock