How To Assemble Your Light Kit - Fanimation HUGH 44 Instructions Manual

Hide thumbs Also See for HUGH 44:

Manual (38 pages)

Table of Contents

Available languages

1. Remove one of the three screws in the support

bracket at the bottom of the motor assembly and

retain the screw for later. Slightly loosen the

remaining two screws. (Figure 1)

2. Assemble the light kit assembly to the support

bracket using the two key slots in the light kit assembly.

Replace the third screw and securely tighten all three

screws. (Figure 2)

3. Remove one of the three screws in the light kit

assembly and retain the screw for Step 5. Slightly

loosen the remaining two screws. (Figure 3)

Securely attach the 9-pin switch cup connector to

the wiring harness socket within the upper LED plate

assembly. (Figure 4)

upper

5. Assemble the

LED plate assembly to the light

kit assembly using the two key slots in the

plate assembly. Replace the third screw and securely

tighten all three screws. (Figure 5)