M: Master Manager Menu Options - Pyronix PCX 46 User Manual

M: Master Manager Menu Options

Bypass Inputs Disables any sensor (input) on the system for the current Arm period. This feature also disables tamper alarms. NOTE:
Inputs programmed as Entry Delay and PA cannot be bypassed.
Operate User Outputs Activates/deactivates user automation outputs that are used to activate remotely the devices such as electronic gates, lights
etc.
*Date & Time Programmes the date and time and enables the summertime automatic adjustment.
*Learn User Codes Programmes the user codes, tags and learns keyfobs (if the PCX-RIX32-WE is installed) to the PCX 46.
Keyfobs & Tags
Review Log The 'Review Logs' function is used to view all operational information of the alarm system, such as arming/disarming
information, access control and alarm activations etc.
SMS Phonebook If SMS texting is enabled, there will be up to 25 mobile numbers that can be programmed to send SMS alarms. Please
discuss this feature with your installer if required.
Walk Test The 'Walk Test' function allows the testing of all programmed inputs on the alarm system.
Bell Test This function is used to tests the external siren (wired and wireless) and strobe.
PC Connect Menu The control panel may be dialled into, and programming information kept on a PC using the InSite UDL software. This
function allows the control panel to dial a Pre-programmed PC telephone number (programmed by your engineer). This is
usually used by your engineer during a maintenance call.
Allow Engineer Menu If this function is enabled, the engineer will require authorisation from you before they can access the engineer menu.
Check Credit Checks the credit level of the SIM Card installed on the PCX 46 GSM modem only
Block Remote Arming Blocks any attempt at arming the system remotely via the upload/download software
Block UDL Blocks any attempt at dialling into the system remotely via the upload/download software
Exit Manager Mode Exits the Manager Mode
NOTE: Pressing the A key will exit the master manager menu from any main menu option above.
*These features are needed to quickly set up the PCX 46.
NOTE: Make sure you change the default master user code (1234).
13