Local Keypad; Wireless Remote Control - Barco F90–W13 User Manual

2.5

Local keypad

About
1
Image 2-3
Item Name
No.
2 Navigation keys
3 OSD Display
4 Standby
5 Back
6 OSD ON/OFF
7 Input
8 Shutter
9 Test Patterns
10 Lens
2.6

Wireless remote control

General
The projector remote control is a full feature wireless remote control, powered by two (2) standard AA batteries. The battery com-
partment is on the back side of the remote control.
The remote control is backlit for use in dark environments. It also has a data-jack that allows for wired connection to the projector.
When the wire is connected, the IR beam and internal batteries are switched off.
The projector has 2 IR receivers, one at the front and one at the top rear, which are used to receive signals from the wireless remote
control.
Source/input compatibility is dependant on projector configuration. The OSD will display "Not available" when
an unsupported source or input is selected.
601–0400–00 F90–W13 18/08/2016
2
Description
Navigation arrows (up, down, left, right), confirm selection ( )
Turn the On Screen Display (OSD) menu ON or OFF.
Power on / standby
Undo action / back to previous screen.
Deactivate the On Screen Display (OSD). Only critical warnings will be displayed.
Activates input source menu on OSD or in LCD
Open or close lens shutter
Activates test pattern menu on OSD or in LCD
Activates test pattern menu on OSD or in LCD
2. Getting to know the projector
3
10 9 8
4
5
6
7
15