Menu Memory - Barco F90–W13 User Manual

5. Getting started
• Press OK to select or deselect a checkbox (turn a function ON or OFF).
• Use the arrow keys to move the barscale slider up or down on the value line. For a barscale 0-9, each step will equal 10% of
the total value.
• To enter the value as a direct number, press ENTER, input the digit(s), and then Press ENTER again to execute and exit cursor
mode e.g. ENTER 79 ENTER.
Changes to values are implemented dynamically.

Menu memory

The OSD menu remembers the last selected sub–item as long as the projector is running. The menu memory is reset when restarting
the projector from standby.
40 601–0400–00 F90–W13 18/08/2016