Statistics Screen; Optimizing Measurements - OPHIR vega User Manual

A circle is drawn around the latest measurement to be
recorded.
Press the "Rate" softkey to change the sampling rate.
Press the "Reset" softkey to erase the graph and clear
the statistics.

7.4 Statistics Screen

This screen shows statistics for power, position, and size
measurement over time.
Figure 7.4
Statistics Screen
Press the "Rate" softkey to change the sampling rate.
Press the "Reset" softkey to clear the statistics.

7.5 Optimizing Measurements

7.5.1. Zeroing.
When a BeamTrack sensor is attached, the zeroing
function of the Vega will zero the BeamTrack's
measurement circuitry as well.
87