OPHIR vega User Manual page 109

Graph 5.
Pulsed Laser Damage Threshold for Pyroelectric Sensors
Rev 2.37-1/09.1.14/ykp+bae BeamTrack Statistics Screen and Analog Hold/Release. Also corrected chapter 9
(Calibration, Maintenance and Troubleshooting), charging info, power table and PD300 table, updated tables
1,2 & 3.Rev 2.19-2/25.03.12/be New Ophir-Newport logo
Rev 2.19-1/07.06.11/yp+be Added Chapter 7 BeamTrack Features. Renumbered chapters that follow. Put in link
to Chapter 7 from end of Chapter 4 Operation with Thermopile Absorber Sensors. Updated Pyroelectric
Normalize picture that was too fuzzy. Updated graphs, web address and cover page design (new logo).
Clarified zeroing section 2.5.1. In section 2.5.5. clarified user threshold. Clarified and corrected analog output
section 3.5.3 & Updated analog output accuracy is spec. In section 4.5.3 took out "Note to users of 3A-P type
sensors". In section 6.2.2. added clarifications & added section 6.2.2.3 "Setting the Threshold (PE-C sensors)"
and note in 6.4.1.2. In chapter 9 added PF took out HL, clarified linearity and redid "Total Accuracy of
Calibration" section. Corrected "sensor" to "sensor".
rev 1.98-1 /21.06.09/yp Logging can hold up to 250,000 points. Added section 3.6.5 sensor disconnect / connect
feature; warning about change in log system format and suggestion to upload files before upgrading firmware,
updated pyro sensors graph rev 1.84-1/02.04.08/be New rev 1.85-1 /01.01.09/be corrected errors in spec and
added rectangular density, firmware update instructions, Japanese, updated graphs and head table rev 1.59-1
/24.05.06/be continuous spectral curve & updates
ev 1.45-3 /18.01.05/be new graphics rev 1.45-2 /25.11.04/be new logo + banner
rev 1.45-1 /28.10.04/be corrected errors+added PD300-BB & CIE, BC20 sensor
rev 1.30-2 /12.104/eg corrected errors
Vega User Manual
Ophir P/N 1J06047
09 January 2014
Rev 2.37-1
For latest version please visit our website: www.ophiropt.com/photonics
108