OPHIR vega User Manual page 48

4.4.2.6.1. Data Storage and Transmission
When using thermal and photodiode sensors the data
logging period is anywhere from 20 seconds to 600 hours.
The number of points stored in the data register is up to
27000 points unless less data is available or a lower
Sample Rate has been selected.
The data can be stored to file as described below. To
store the data do the following:
1. When you have gathered enough points press
"Pause" or wait until the data register is full and
"FULL" flashes. Press "Exit" and you will be asked if
you want to enter the file control system. Press "Yes".
Figure 4.4
Laser Power vs Time Graph
Figure 4.5
Data Storage Screen
47