Pyro Scope Adapter - OPHIR vega User Manual

6.7 Pyro Scope Adapter

A special adapter can be purchased which is plugged in
between the sensor connector and the Vega sensor
socket. This adapter has a cable and BNC connector to
attach to an oscilloscope. It enables the user to see on
the scope pulses proportional to energy up to the
maximum pulse rating of the sensor. Unlike the Vega
meter, which samples at the maximum rate, the scope
adapter shows every single pulse.
Activate the scope adapter as follows:
1. Plug the adapter into the Vega meter and then plug
the sensor plug into the adapter. Plug the BNC
connector into a standard 1M scope input.
2. Enter power or energy "Menu" and select "Scope".
The display will now say "In Scope Mode". Select the
appropriate
wavelength in the usual way.
3. You can return to the ordinary measurement mode by
pressing "Energy" (or "Power") from the scope mode
screen.
measurement
83
range and laser