OPHIR vega User Manual page 54

4.5.6.1. To use the Vega for graphical display of energy
- regular mode
1. Make sure that the Vega is in the correct energy
measurement range. If not, enter "Range", adjust and
enter again.
2. From the energy measurement screen enter "Menu"
and then select "Data-Log". Now press "Log" and the
energy log screen will appear. Press "Go". Now fire a
pulse when the "READY" legend flashes.
measurement will immediately begin.
screen is full, the display will scroll and the latest
points will continue to be displayed. When the data
register is full, "FULL" will be displayed. If you wish to
see finer variations in the graph, press the "Zoom"
button.
3. When "Reset" is pressed, the Vega is ready to begin a
new measurement. If you want to store the data
before making a new measurement, see section
4.4.2.6.1 on data storage.
Warning:
Pressing "Reset" will erase all previously stored data.
Pressing any of the navigation keys will end the log
session and return to the setup screen.
A statistical summary of the data on the screen is
shown on the top. If you wish to permanently store the
data in a file, press "Enter" and then choose "Yes" to
enter the file system. See section 4.4.2.6.1 for further
information.
Note:
Zoom can only be pressed after at least one pulse has
been recorded.
53
The
When the