OPHIR vega User Manual page 49

2. When the screen is entered, the data in the latest
power graph will be stored temporarily in register
"Temp".
permanent register you wish to use for storing the
data and press "Save". The data in the "Temp"
register will be transferred to the selected register.
This data storage is permanent and the data is not lost
when the instrument is turned off. If you try to save
into a file which already has data, a warning will
appear that the new save will erase previous data in
the file. If you want to delete the data from a file,
select the file and press "Delete".
3. At the bottom of the screen is a summary of the data in
the selected file. If you press "Exit" and then select
"View Files" and enter, you will be able to show the
actual data points instead of a graph. Select the data
file you want and press the Enter Key (middle button
of the navigation keys). This will open a screen
showing all the data points collected in this file. Press
"XXX>" to get to the next page of data and "<XXX" to
get to a previous page. Pressing "Exit" will get you
back to the previous screen.
Note:
In version 1.96, the internal file system format has
been changed to enable logging of larger files. To
prevent possible corruption, logs made in versions
earlier than 1.96 should be uploaded to the PC before
upgrading the firmware version to 1.96 or higher.
Data Transmission to PC
The data stored in the Vega file system can be
transmitted to a PC via RS232 using the Starcom PC
package supplied with the Vega (or via USB using the
StarLab PC or application). The data can be transmitted
in real time as well according to the following table:
With the navigation buttons select the
48