OPHIR vega User Manual page 32

inserted before switching on the instrument and then the
instrument will automatically either be in RS232 or USB
mode depending on which cable is attached. See section
4.4.2.6.1 for details of communication with PC.
3.6.5. Head Disconnect / Connect Recognition
As of ROM version 1.96, the Vega display will recognize if
a sensor had been connected or disconnected while the
device is powered on. If such an event happens, a
warning screen will be displayed for 3 seconds, after
which the Vega will restart itself in its new configuration.
Thus if a user wants to change sensors during his
experiment he no longer needs to power down the Vega
to do so.
Figure 3.3
Head Disconnect / Connect Warnings
Note:
When working with Ophir's StarLab application, the
Vega's restarting itself will be recognized as a Device
Disconnect.
31