Gui And Keypad Settings - OPHIR vega User Manual

3.7 GUI and Keypad Settings

The Vega allows customization of the display's interface
in order to enhance the user experience. This section
describes the various extended GUI controls.
1. Disconnect the sensor, turn off then on again. "Head
Disconnected" will be displayed.
2. With the navigation keys go to the
press the Enter key. Settings that can be adjusted
are, LCD Lighting, Keypad Lighting, Color Scheme,
and Bargraph Style (and parameters).
3. Select the setting to adjust with the up/down
navigation keys and press Enter.
4. Select the value desired with the up/down
navigation keys and press Enter.
5. Repeat until all settings are adjusted. Press Exit
when finished
3.7.1. Keypad Lighting
The Vega's keypad lighting can be set to one of the
following settings:
 On: Keypad illumination constantly on.
 Off: Keypad illumination constantly off.
Figure 3.4
Vega GUI Setup Screen
32
icon and