Chapter 2. Qruick Reference; Getting Started - OPHIR vega User Manual

Chapter 2.
Quick Reference

2.1 Getting Started

The Vega is equipped with "soft keys." That is, the
functions of the keys change as indicated by the legend
above each key. (See Figure 2.2).
To connect sensor to the Vega Display
Insert the 15 pin D type connector of the measuring
sensor cable into the socket marked "Head Input" on the
rear panel of the Vega display. (See Figure 2.1)
12VDC AN OUT HEAD INPUT USB/RS232 OUTPUT
Figure 2.1
Vega Rear Panel View
5