Programming The Camera (Time Lapse); General; Procedure - FLIR T4 series User Manual
Hide thumbs
Also See for FLIR T4 series:
- User manual (122 pages) ,
- Getting started (122 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
20
Programming the camera (time
lapse)
20.1 General
You can program the camera to save images periodically (time lapse).
20.2 Procedure
Follow this procedure:
1. Push the joystick to display the menu system.
2. Use the joystick to go to
3. Push the joystick. This displays a submenu.
4. Select
(Time lapse).
5. Push the joystick. This displays a dialog box, where you can set the save conditions:
• Save interval: Use the joystick to set the time interval between each saved image.
• Total number of images: Periodic saving will stop when the set number of images
have been saved.
6. Push the joystick. This closes the dialog box. The time interval is displayed at the top
of the screen.
7. To manually start or stop periodic saving, briefly push and release the Autofocus/
Save button.
#T559879; r. AP/36066/36066; en-US
(Recording mode).
57
Advertisement
Table of Contents
