Previewing An Image; General; Procedure; Opening A Saved Image - FLIR T4 series User Manual

14 Working with images

14.2 Previewing an image

14.2.1 General

You can preview an image before you save it. This enables you to see if the image con-
tains the information you want before you save it. You can also adjust and edit the image.
Note The camera must be configured to display a preview image before saving. Select
(Settings) > Save options > Preview image before saving = On.

14.2.2 Procedure

Follow this procedure:
1. To preview an image, push the Autofocus/Save button fully down. This displays the
preview.
2. Manual image adjust mode is now active, and the status icon
image adjustment instructions, see 14.5 Adjusting an infrared image, page 34.
3. To edit the image, push the joystick. This displays a context menu. For editing instruc-
tions, see 14.4 Editing a saved image, page 33.
4. Do one of the following:
• To save the image, push the Autofocus/Save button fully down.
• To exit preview mode without saving, push the Back button

14.3 Opening a saved image

14.3.1 General

When you save an image, the image file is stored on the memory card. To display the im-
age again, open it from the image archive.

14.3.2 Procedure

Follow this procedure:
1. Push the Image archive button
2. Move the joystick up/down or left/right to select the image you want to view.
3. Push the joystick. This will display the image at full size.
4. Do one or more of the following:
• To switch between an infrared image and a visual image, move the joystick up/
down.
• To view the previous/next image, move the joystick left/right.
• To edit the image, add annotations, display information, or delete the image, push
the joystick. This displays a context menu.
• To return to the image archive overview, push the Back button

14.4 Editing a saved image

14.4.1 General

You can edit a saved image. You can also edit an image in preview mode.

14.4.2 Procedure

Follow this procedure:
1. Open the image in the image archive.
2. Push the joystick and select
#T559879; r. AP/36066/36066; en-US
.
(Edit) from the menu.
is displayed. For
.
.
33