Connecting The Main Unit To Input Devices - Canon DP-V2420 Instruction Manual

Connecting the Main Unit to Input Devices

The video display has 3G/HD-SDI and HDMI input terminals to connect input devices.
CAUTION
• Check that the power of the video display and input devices is switched off before connecting.
■ SDI input signals
Refer to the 3G/HD-SDI input terminals diagram when connecting to the desired input signal. (A, B, C, D)
SDI (IN) terminal
Quad Link
(Square Division)
Quad Link*
(2 Sample Interleave)
Quad Link
Dual Link*
(2 Sample Interleave, Dual
Link 3G-SDI)
Single Link
* The signals are automatically switched when "Image Division" is set to "Automatic".
Input signal
3G-SDI Top left, Mapping signal
Top right, Mapping signal
Bottom left, Mapping signal
Bottom right, Mapping signal
HD-SDI
3G-SDI
3G/HD/SD-SDI
Display area icon
B
A
C D
Input terminal
Link 1
Link 2
Link 3
Link 4
Link 1
Link 2
Link 3
Link 4
Link 1
Link 2
Link 1
Link 2
Input A/Input B/
—
Input C/Input D
Actual screen display location
A B
C D
Input A
Input B
Input C
Input D
Single input system
Input A
Input B
Input C
Input D
Input A
Input B
Single input system
Input C
Input D
Input A
Input B
Max. two input
systems
Input C
Input D
Max. four input
systems
Installation/Connection 19