Canon DP-V2420 Instruction Manual page 71

Item
Protect Target
Protect
Firmware Update
Export/Import
Export
Import
Power on Setting
Reset All Settings
Setting Options (underline indicates factory default)
You can remove Picture Mode and Select Channel from the items to be protected.
Picture Mode: Select "On" to protect or "Off" to exclude settings for "Picture Mode".
On, Off
Select Channel: Select "On" to protect or "Off" to exclude settings for "Select Channel".
On, Off
Select "OK" to protect. When a password has been set, enter the password and select "OK".
• Unlocking Protect Settings
Move the selection frame to "Protect" and press the Jog dial for approximately 3 seconds. When a
password has been set, enter the password and select "OK".
This function is used to update the video display firmware. Refer to the Canon website for detailed
information.
Sets the export/import main menu settings.
Note
• The following settings cannot be exported or imported.
Adjustment Target values of Calibration (including calibration results)
Display Settings Zoom Preset, Frame Hold
Function Settings Test Pattern, Various Function (Monochrome, Blue Only, Red Off,
Green Off, Blue Off)
System Settings Date/Time, Fan Stop, Export/Import, Power on Setting
• User LUT data cannot be exported or imported to "User 1 to 3" under "Target".
• Data exported from this product may not be imported to products of which firmware version
is earlier than the version of this product. To import data, update the firmware to the latest
version.
Target: Select the export destination.
USB: Export to a USB memory.
User 1-3: Export to the built-in memory of the main unit.
Filename: Factory default is "dinfo_dpv2420.dat". You can change the name of the file to be
exported to the USB memory within 16 one-byte characters including alphabetical
characters, numbers, and symbols.
Execute: Performs export.
Target: Specify the destination to save the file to be imported.
USB, User 1-3
Filename: Displays files with the extension ".dat" so you can select from among them.
Settings (All, Adjustment, Channel Settings, Display Settings, Audio Settings,
Marker Settings, Function Settings, System Settings): Select the settings to import.
Execute: Performs import.
You can select the state of the display when the power is turned on.
Last memory: The video display starts up with the settings last used.
User 1-3: It starts up with the settings saved in "User 1-3" under "Export".
Returns all settings to factory default. When selected, the message "Reset all settings to factory
defaults?" appears.
OK: Performs reset.
Cancel: Returns to the previous screen without resetting.
OSD Menu 71