Canon DP-V2420 Instruction Manual page 43

Item
Input Transform
Output Transform
Output Transform
Surround
Color Range
Setting Options (underline indicates factory default)
Sets whether or not to apply ACES Input Transform to "3G-SDI RAW" signals (
Mode" is set to "Canon Log" and "ACESproxy" is selected for "Color Gamut" or when "ACESproxy"
is selected for "Picture Mode".
Automatic: Applied automatically.
Off: Not applied.
This is displayed instead of Gamma and Color Gamut when "Picture Mode" is set to "Canon Log"
and "ACESproxy" is selected for "Color Gamut" or when "ACESproxy" is selected for "Picture
Mode".
ITU-R BT.709, ITU-R BT.2020, DCI-P3: ACESproxy is converted into respective mode.
This is displayed instead of "Gamma" and "Color Gamut" when "Picture Mode" is set to "Canon
Log" and "ACESproxy" is selected for "Color Gamut" or when "ACESproxy" is selected for "Picture
Mode".
Dim Surround: E nables Dim Surround process specified by ACESproxy.
Dark Surround: Enables Dark Surround process specified by ACESproxy.
Sets the quantization range.
Automatic: Sets the range based on signal information automatically.
Full (0-255): Sets to Black level: 0; White level: 1023 (10-bit)/4095 (12-bit).
Limited 1 (16-235): Limits the black and white range.
Black level: 64 (10-bit)/256 (12-bit)
White level: 940 (10-bit)/3760 (12-bit)
Limited 2 (16-255): Limits the black range.
Black level: 64 (10-bit)/256 (12-bit)
White level: 1023 (10-bit)/4095 (12-bit)
Note
• Setting is disabled when "ACESproxy" is selected for "Picture Mode" or "ACESproxy" is
selected for "Color Gamut".
• Operations when "Automatic" is selected are described below.
-
When HDMI is selected, "Full (0-255)" or "Limited 1 (16-235)" is set automatically depending
on HDMI signal information.
-
When SDI is selected, the setting is configured according to the settings for Picture Mode,
Color Gamut, and Gamma.
Picture Mode
Color Gamut
Gamma
Other than the above
Setting Options
DCI-P3
DCI-P3,
Cinema Gamut to DCI,
DCI-P3+ to DCI
Canon Log (HDR),
Canon Log 2 (HDR),
Canon Log 3 (HDR),
SMPTE ST 2084
Canon Log, Canon Log 2,
Canon Log 3
49) when "Picture
Color Range to be Set
Full (0-255)
Limited 2 (16-255)
Limited 1 (16-235)
OSD Menu 43