Canon DP-V2420 Instruction Manual page 51

Item
Picture Function Target
Separator
The factory default settings for each channel is shown in the following table.
Input Configuration
Select Input Signal
Image Division
Format
Internal Sync
Channel Name
Picture Mode
Picture Mode R
Audio Input
Marker/TC/WFM/VEC Input
Picture Function Target
Separator
In the "Multi View (Dual)" display, sets the screen for enabling image quality setting functions in the
function settings.
Function Settings where displays change due to this function: "Peaking", "False Color",
"Various Function (Monochrome, Blue Only, Red Off, Green Off, Blue Off)"
Left and Right: Entire screen
Left: Left screen only
Right: Right screen only
In the "Multi View (Quad)" or "Multi View (Dual)" display, displays the border lines of the screen.
On, Off
CH
Setting Options
CH1 CH2
3G/HD-SDI HDMI
Automatic Automatic
Automatic Automatic
Automatic Automatic
Off Off
(Blank) (Blank)
ITU-R BT.709 ITU-R BT.709
ITU-R BT.709 ITU-R BT.709
Input A Input A
Input A Input A
Left and Right Left and Right
Off Off
CH3 CH4 to CH30
3G-SDI RAW –
Automatic Automatic
Automatic Automatic
Automatic Automatic
Off Off
(Blank) (Blank)
Canon Log ITU-R BT.709
Canon Log ITU-R BT.709
Input A Input A
Input A Input A
Left and Right Left and Right
Off Off
– : not set
OSD Menu 51