Table of Contents
Advertisement
Item
Time Code
Enable
Type
Size
Position
Wave Form Monitor
62
OSD Menu
Setting Options (underline indicates factory default)
Display the time code superimposed on the signal.
VITC 01:23:45.05
Note
• Time Code cannot be displayed in the following cases:
-
When "Frame Hold" is "On"
-
During the execution of "Playback File" under "Screen Capture"
-
When the location selected for "Time Code" and "Audio Level Meter" to be displayed is the
same
-
When "Test Pattern" is displayed
Switches the time code display On, Off.
On, Off
Selects the type.
VITC, LTC
Note
• This setting becomes invalid when HDMI signal is input and is fixed to "VITC".
Selects the size.
Large, Small
Selects the display position.
Top Left, Top Right, Bottom Left, Bottom Right
Note
• This setting becomes invalid in the "Multi View (Dual)" display.
Configures various settings for the wave form monitor. On the wave form monitor, the horizontal axis
shows the horizontal resolution of the video and the vertical line shows the signal level.
Signal level
Note
• Wave form monitor cannot be displayed in the following cases:
-
When an enlarged image is displayed
-
When "Frame Hold" (during interlace signal or PsF signal) or "False Color" is "On"
-
When "Peaking 1" or "Peaking 2" is selected
-
During execution of "Playback File" under "Screen Capture"
-
While "Test Pattern" is displayed
• Only the signal set by "Marker/TC/WFM/VEC Input" is displayed in the "Multi View (Quad)" or
"Multi View (Dual)" display.
• When "Wave Form Monitor" is set to "On", "Vector Scope" turns "Off".
255
0
Horizontal resolution of video
IRE
100 %
50 %
0%
-4%
Advertisement
Table of Contents
