Connecting The Main Unit To Input Devices - Canon dp-v3010 Instruction Manual

Connecting the Main Unit to Input Devices

This main unit has four inputs which correspond to a display area. The display area icons located in the input terminal
area shows where the input video is displayed on the screen. Please ensure these are connected correctly as indicated
by the icons.
In addition, SDI has two I/O systems. Please ensure these are connected correctly according to the input number.
CAUTION
• Check that the main power of the main unit and input devices is switched off before connecting.
• For safety, do not connect connector that may have excessive voltage to the terminal of this main unit when connecting
peripheral devices.
3G/HD-SDI
Input
number
■ 4K or QFHD signals input through SDI
Displays using 4 inputs.
3G/HD-SDI
3G/HD-SDI supports two input systems.
Input 3G/HD-SDI 1 to input 1,
Input 3G/HD-SDI 2 to input 2 ("Input Configuration"
Area A
(3G/HD-SDI 1)
Area A
(3G/HD-SDI 2)
Area C
(3G/HD-SDI 1)
Area C
(3G/HD-SDI 2)
16 Installation/Connection
Display area icon
Actual screen display location
B
A
A
D
C
C
Input
number
40).
Area B
(3G/HD-SDI 1)
Area B
(3G/HD-SDI 2)
Area D
(3G/HD-SDI 1)
Area D
(3G/HD-SDI 2)
Display area icon
A
B
C
D
Dual Link HD-SDI
Input Link A signal to input 1, Link B signal to input 2.
Area A
Area C
DisplayPort
B
D
Area B
Area D