Table of Contents
Advertisement
Now, open the accessory box and remove the accessory sleeve. You will find the
packaging along with the black cable, carefully remove it and place it on your work surface. Remove the cardboard
packing material and take the
The build platform should now be visible. It is an aluminum plate covered in a thin polyamide film. This is the surface
that your objects will be printed on.
The next step is to raise the build platform; there are two ways to do this:
1. Turn the screw which is behind the rotating platform.
2. Grasp the printing platform with one hand on each side, raising it slowly and keeping it level.
Stop once the platform is just shy of the bronze nozzle.
Now you can see two rolls filaments we offer for free, you can get them easily after removeing the rest packaging.
accessory box
from the printer, set it aside for later.
Note: Remember not remove the film.
dual extruder heads
in the protective
４
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Creator Pro and is the answer not in the manual?
Questions and answers