FLASHFORGE 3D PRINTER Creator Pro Startup Manual page 12

A. Slicing Profile: select
B. This tells the printer which extruder to use for a dual-extruder head printer, either the
C. If your sample will have any hanging surfaces, it is recommended to have support. Select
support. Exterior means surface support.
D. Object infill: where
filament. Low infill also can reduce the corners lift up issue during ABS printing.
E. Layer Height: this controls the vertical resolution of the print. The recommended thickness is
F. Number of shells: this is the wall thickness; it's usually set at
G. Feedrate is the speed at which the filament is fed into the extruder, and this is usually set between
printing, 60 is recommended; for
H. Travel feedrate is the speed at which the printer head moves over the base, and it's usually set between
ABS printing, 80 is recommended; for
I. Print Temperature
the default filament.
After you finished inputting in the settings, click
For users who did not choose the default installation path in the installation of Python, clicking the
button in Replicator G will result in dialogue box popping up alerting that the executable Python file cannot be found.
In order to solve this, click the
menu.
Replicator slicing defaults for ABS printing, then select Replicator 2 slicing defaults for PLA printing.
Full support
100% is a solid print, 0% is a hollow object. The recommended setting is
PLA printing,
PLA printing, 120
is the temperature to which the nozzle is heated. This varies between filament types. Set it to 220 for
Generate Gcode
No button to dismiss the dialogue box. Next, we need to configure the corresponding
means all support.
1.
100 is recommended.
is recommended.
and the progress bar will appear.
left or right head can be selected.
None indicates that there is no
10%; this will save time and
0.27mm.
30 and 100. For
30 and 120. For
Generate Gcode
ABS
１０