Set Vmodem-Phone; Set Ssl Line - Perle IOLAN CSS Cli Reference Manual

Set Vmodem-Phone

Description This command associates a phone number with an IP address and TCP port. This
User Level Admin
Syntax
Options

Set SSL Line

Description Sets the SSL/TLS parameters for the line. SSL/TLS can be enabled for the following
User Level Admin
Syntax
Options
enables the existing modem application to issue a dial command with a phone number.
The phone number will be search in this table and if an exact match is found, the
associated IP address and TCP port will be used to establish the connection. This is a
universal command, meaning that all VModem lines will access to the entries defined
here. 1-port models support up to 4 entries, all other desktop models support up to 8
entries, and rack-mount models support up to 48 entries.
set vmodem-phone entry <number> phone-number <string>
<IP_address> <TCP_port>
set vmodem-phone entry <number> delete
entry
Specify the entry number in the vmodem phone number table.
phone-number
Specify the phone number that your application uses to connect to remote location.
Enter the number exactly as it is issued by your application.
<IP_address>
Specify the IP address of the remote host that is receiving the vmodem connection.
<TCP_port>
Specify the TCP port that the remote host is lisening on for the vmodem connection
delete
Deletes the specified entry from the phone number table.
Line Services: DSLogin, Raw, Bidir, VModem, Server Tunnel, Client Tunnel, Modbus
Master, Custom App and Trueport.
set ssl line .|<number>|* [enable on|off] [use-server on|off]
[version any|tslv1|sslv3] [type client|server]
[verify-peer on|off] [validation-criteria
country <code>|state-province <text>|locality <text>
|organisation <text>|organisation-unit <text>
|common-name <text>|email <email_addr>]
enable
Activates the SSL/TLS settings for the line.
use-server
Uses the SSL/TLS server configuration for the line.
version
Specify whether you want to use:
Any—The IOLAN will try a TLSv1 connection first. If that fails, it will try an
SSLv3 connection. If that fails, it will try an SSLv2 connection.
TLSv1—The connection will use only TLSv1.
SSLv3—The connection will use only SSLv3.
The default is Any.
Line Service Commands
Line Commands 89