Set Modem; Set Termtype; Show Line - Perle IOLAN CSS Cli Reference Manual

Line Commands

Set Modem

Description Sets the modem initialization strings for a defined modem. If you wish to add a new
User Level Admin
Syntax
Options

Set Termtype

Description Sets the terminal type for the current terminal session. term1, term2, and term3 refer to
User Level Restricted, Normal, Admin
Syntax
Option

Show Line

Description Shows the line settings/information.
User Level Admin
Syntax
76
modem, use the
add modem
set modem <modem_name> <init_string>
<modem_name>
Predefined modem name.
<init_string>
Specify the initialization string for the modem. This can be up to 60 characters long, but
cannot include spaces.
the user-uploadable custom terminal definitions. If these are not present, the default is
wyse60.
set termtype
[wyse60|vt100|ansi|dumb|tvi925|ibm3151te|vt320|hp700|term1|term2
|term3]
wyse60|vt100|ansi|dumb|tvi925|ibm3151te|vt320|hp700|term1|term2|term3
Specifies the type of terminal connected to the line:
Dumb
WYSE60
VT100
ANSI
TVI925
IBM3151TE
VT320 (specifically supporting VT320-7)
HP700 (specifically supporting HP700/44)
Term1, Term2, Term3 (user-defined terminals)
show line <number>|*
IOLAN SDS/SCS/STS CLI Reference Guide, Version 3.6
command.