Information - ABB ACS 600 User Manual

Chapter 8 – Parameters

4 Information

Code Parameter
4 INFORMATION
4.01 SOFTWARE
VERSION
4.02 DTC SW
VERSION
4.03 APPLIC SW
VERSION
4.04 CONV NOM
VOLTAGE
4.05 CONV NOM
CURRENT
4.06 CONV NOM
POWER
4.07 CONV MAX
VOLTAGE
4.08 CONV MAX
CURRENT
8-4
The software version (Parameters 4.01 and 4.03) is expressed as
follows:
Character Example
no
1 I
2 M
3 4
4 B
5 to 8 5060
T Range/Unit Description
y
p
e
C IM4x xxxx This signal describes the software of the downloaded loading
package.
C xxxx Software version number of the flux software. This fixed part of
the software consists of the line converter control, operation
system, communication control of the DDCS channels and
Modbus software for the control panel.
C IxAx xxxx The application software name can be identified by means of
this signal. This part of the software has been written using PC
elements.
R V Downloaded line converter nominal supply voltage
R A Downloaded line converter nominal line current
R kW Line converter nominal power.
R V Maximum value of converter voltage measuring range
R A Maximum value of converter current measuring range
Meaning
I = Input bridge software
Product: M= ISU
Software type:
4 = non-parallel connected ISU (Parameter 4.01)
5 = parallel connected ISU (Parameter 4.01)
A = application software (Parameter 4.03)
Control board: B = NAMC-2x, E = NAMC-11
Software version number
ACA 635 IGBT Supply Sections
Integer
Scaling
1 = 1 V
1 = 1 A
1 = 1 kW
1 = 1 V
1 = 1 A