Table of Contents
Advertisement
Handset Problems (continued)
Symptom
After pressing
[
], dial tone is
On/Off
not heard and the
RADIO LED on
the radio module
does not light.
You can hear the
party on the other
end, but they
cannot hear you.
MUTE appears in
the handset display.
After pressing [
],
On/Off
the handset beeps
and RANGE shows
in the handset
display.
No ring on incom-
ing call, RANGE
appears in handset
display.
While talking and
walking, the
handset beeps and
RANGE flashes in
the handset display.
Possible Causes
There is no battery
pack in the handset.
Battery pack is not
inserted properly in the
handset.
Battery pack is not
charged sufficiently.
Handset is out of range
of its matching radio
module.
There is interference
from another electrical
device (microwave) or
metal walls.
The [
] button was
Mute
pressed inadvertently.
Handset is out of range
of its matching radio
module.
An electrical device is
interfering with your
communications link.
Handset is out of range of
its matching radio
module.
You are approaching an
out-of-range condition.
Possible Solutions
Insert a battery pack in the handset.
Make sure the battery pack is inserted
properly in the handset.
Remove the handset battery pack,
place it in the battery charger's fast
charge compartment until fully
charged. If you have a charged battery
pack, place it in the handset while the
other battery pack recharges.
Move the handset closer to the radio
module.
Remove the electrical device that is
causing interference, or move the
handset to another location.
Press [
] again to turn off the mute
Mute
feature.
Move the handset closer to the radio
module.
Remove the interfering device or power
it off, or move the handset to another
location.
Move the handset closer to the radio
module.
Move back towards the handset's match-
ing radio module until the display stops
showing RANGE.
Troubleshooting
5-3
Advertisement
Table of Contents
